Features
Material: Bee hwood handle, made of high-quality steel.
Black treatment of knife blade: sharp and durable.
It is suitable for carving wood and DIY carving and rubber seal.
Specifications
|
Model No |
Size |
|
520520012 |
12pcs |
Product Display
Application of wood carving tool set:
Wood carving tool set is the special knife for carving wood and DIY carving and rubber seal.
Tips:the different types of wood carving knife
Triangular knife：
The cutting edge is triangular, because its front is on the left and right sides, and the sharp point is on the middle corner. Suitable tool steel (generally 4-6 mm round steel) shall be selected for making triangular cutter, and 55 ° - 60 ° triangular groove shall be milled, the two waists shall be ground flat, and the mouth end shall be ground into a cutting edge. If the angle is large, the lines will be thick. On the contrary, it is fine. The triangular knife is mainly used to carve hair and decorative lines. It is also a tool commonly used in engraving and watermark woodcut art plate making. During operation, the triangular knife point is pushed on the board, wood chips are spit out from the triangular groove, and lines are drawn where the triangular knife point is pushed.
Arc knife ：
The cutting edge is circular, which is mostly used for circular and circular dents. It is also very useful for carving traditional flowers, such as the round surface of leaves, petals and stems of flowers need to be shaped with a round knife. The horizontal operation of round knife is labor-saving and can adapt to large fluctuations and small changes. Moreover, the line of the round knife is uncertain, so it is flexible and easy to explore. According to different uses, the models of round knives should be different, and the size range is basically between 5cm and 0.5cm. The two corners of the knife edge for making round figures should be polished off to form a circular arc. Otherwise, when carving clothing patterns or other dents, they will not be able to move, but will also damage both sides of the dent path. In case of relief carving, the two corners of the knife edge should be reserved and the corners of the ground should be carved by using the function of the corner tip. Therefore, two types of relief carving should be equipped. There is a difference between a round knife and a round knife. A round knife with an inclined plane in the groove and a straight back is a straight one. It eats deep wood and is most suitable for making round carving, especially in the blank drawing and digging stages. The bevel is on the back of the knife, and the straight slot is a round knife with opposite mouth. It is more flexible to eat wood, and can move the knife gently or pick the ground. It is more useful in reliefs. The shape of the round knife can also be made into the bending shape of the iron pole according to the needs, so as to stretch into deeper parts and dig holes.
Flat knife：
The cutting edge is flat and straight. It is mainly used to cut and smooth the concave and convex of the wood surface to make it smooth and traceless. Large models can also be used to chisel large ones. They have a sense of blockiness. They can be used properly, such as the brushwork effect of painting. Vivid and natural. The sharp angle of the flat knife can mark lines, and when the two knives intersect, the foot of the knife or the pattern can be removed.
