Description
Material: This gap gauge is made of aluminum alloy, which is corrosion-resistant, has a long service life, and is not easy to rust.
Design: Small size design, easy to use, flexible to operate, and can be carried around. With precise measurement, it can quickly measure material thickness or internal dimensions of joints.
Application: This woodworking depth ruler is very suitable for woodworking enthusiasts, designers, engineers, architects, students, and teachers.
Specifications
|
Model No |
Material |
|
280430001 |
Aluminum alloy |
Product Display
Application of the woodworking gap gauge:
Whether table saw, bevel saw, cantilever saw, push saw, engraving table or other tools to cut slots, this gap gauge can be used to adjust the required slot size.
Operation method when use the gap gauge:
The gap gauge can quickly measure the thickness of the material or the internal dimensions of the joint.
Just put one end of the ruler into the gap, slide the ruler to fill the gap, and then tighten the knob to accurately read the length of the gap.
Both inside and outside diameters can be measured. With a measuring range of 0-35mm (0-1/2in), you can meet almost all your requirements.
When using, the surface should be cleaned of oil stains first, and the gap gauge should be gently and evenly inserted into the measured gap, without being too loose or too tight. If it is too loose, the results will be inaccurate, and if it is too tight, it is easy to wear the clearance gauge.
